Have you mastered the five installation steps of the Balama cable hole? Perhaps some people are not very clear, yesterday we
I have also received such consultation calls, so in this issue, I will give you a detailed explanation.
Step 1: Pay attention to inspection: Before installing the Balama cable hole, it is necessary to inspect the wall surface. Check if it is a hollow wall, if there are building facilities such as wires and water pipes, and if necessary, use a detector for detection.
Step 2: Measure the position: Measure the length and spacing of the Balama cable hole on the wall. After determining the position, use a silk screen pen to mark the hole position.
Step 3 Drilling: Drill holes using an electric drill and a 6mm drill bit according to the marked position.
Step 4: Install the hole sleeve: Installing the hole sleeve is to make the position of the Balama cable guide hole more stable. Insert the hole sleeve into the hole, making it flush with the wall surface.
Step 5: Fix the Balama cable hole: Insert the Balama cable hole into the hole sleeve so that it is flush with the wall. Then use an electric drill to drill the expansion tube into the hole and insert the expansion tube into the hole. Use screws to guide the Balama
The cable hole can be fixed on the wall.
The above information is shared for reference only. Thank you for your cooperation! If you have any other needs, you can also contact us at Taizhou Wanli Ship Machinery Manufacturing Co., Ltd.
