Good afternoon everyone! Welcome back to our company website. In this issue, we will take you to learn about Panama
The specific content of the standard data for cable guide holes is as follows:
Number and size requirements of cable guide holes: The number of cable guide holes depends on the size of the vessel and the requirements of the route, while the size of the cable guide holes is determined by calculating the diameter of the cable or rope, with a minimum value of 5 inches.
Requirements for the position and shape of cable guide holes: Cable guide holes should be located, sized, shaped, etc. in the ship design to facilitate the entry and exit of cables or cables, and should follow certain planning and design arrangements. In addition, the shape of the cable guide hole must be circular, with a maximum difference of no more than 0.25 inches (6.35 millimeters) at each angle.
Ship use of cable guide holes: Cable guide holes can be used to properly support ropes or cables during navigation to ensure ship stability, and can also be used for emergency measures such as repairs and fire extinguishing inside the ship.
Cable guide hole refers to the opening hole for cables or wires to pass through the hull or ship components, which is used to directly connect the interior and exterior of the hull for communication, energy supply, etc. According to different needs and usage scenarios, cable guide holes can be divided into three types: cable holes, cable holes, and pipe holes.
The above information is for reference only. If you have any other needs, you can contact us at Taizhou Wanli Ship Machinery Manufacturing Co., Ltd.
